Settings Menu For "Co2+Time Mode - Miele PAC 1045 Mode D'emploi

en - Operation

Settings menu for "CO2+time mode"

If initial flow is switched on, the air purifier will start the running before the actual switch-
on time: if, for example, the switch-on time is set for 6:00 am with 5 minutes of initial flow
time, the air purifier will start at 5:55 am.
After the switch-off time, Miele ThermoControl is started with a running time of
20 minutes. This is followed by a 10-minute fan run-on phase.
Settings
CO2 mode
CO2+time mode
Language
50
CO2+time mode
Room size
Individual day setting
Mon–Fri/Sat+Sun
CO2+time mode
Room size
Individual day setting
Mon–Fri/Sat+Sun
CO2+time mode
Individual day setting
Mon–Fri/Sat+Sun
Flow
Modus CO2+Uhr
Mon–Fri/Sat+Sun
Flow
Intensive circulation
CO2+time mode
Flow
Intensive circulation
Back
Room size
80
m²
Please set
Individual day setting
On Monday 07:00
17:00
Off Monday
On Tuesday 07:00
Please set
Mon–Fri/Sat+Sun
On Mon–Fri
Off Mon–Fri
On Sat–Sun
Please set
Flow
Off
On
Back
Select option
Flow
Off
On
Back
Select option
Intensive circ. speed
100 %
Please set
Intensive circ. time
05 min
Please set
Sensitivity
High
Medium
Low
Select option
Flow speed
%
100
Please set
Flow time
05 min
Please set