Overview of operating statuses
The following operating statuses are shown in the display:
Ready for operation
The power supply has been connected and the appliance is ready for operation.
Flow
The fan runs at a set flow rate and duration to clean the air before the air purifier switches to normal opera-
tion.
Manual operation
The appliance is in normal operation.
Manual+time opera-
tion
CO2 operation
CO2+time operation
ThermoControl active
Relevant pathogens are deactivated automatically by Miele ThermoControl after every use.
Fan run-on
The fan keeps running after Miele ThermoControl in order to cool the filter.
Intensive circ. active
The fan runs at a higher speed for a short period in order to quickly circulate the air within the room.
Button functions
The following button functions apply during operation. The logic function varies depending
on the operating status, as detailed below:
Button
Type of actuation
Press,
release
and
Short press
(simultan-
(<1 sec)
eously)
Long press
(>3 sec)
Short press
(<1 sec)
Long press
(>3 sec)
Short press
(<1 sec)
Long press
(>3 sec)
Button func-
tion
Switch on, next
Switch between operating statuses (see "Changing the operating status").
or switch off
Cancel
Intensive circulation
In the
Exit
Go back one menu level
Operating values display
Exit the
When entering a code: exit the code entry level
When entering a value: exit the value entry level without saving
Temporarily hide warning messages
Confirm
Settings
Access to
Select a menu element
Deactivate the keypad lock
When entering a value: save the current value entry
Up
Select the previous menu element
When entering a value: increase the selected position by one value (+1)
Left
When entering a value: move one position to the left
Down
Select the next menu element
When entering a value: decrease the selected position by one value (-1)
Right
When entering a value: move one position to the right
Logic function
menu: cancel intensive circulation
menu
menu
en - Operation
45