Periods Of Non-Operation; Troubleshooting - Electrolux EC3202AOW1 Notice D'utilisation

Masquer les pouces Voir aussi pour EC3202AOW1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Defrost the freezer when the frost layer
reaches a thickness of about 10-15 mm.
The amount of frost on the walls of the
appliance will be increased by the high
level of the outer environment humidity
and if the frozen food is not wrapped
properly.
The best time to defrost the freezer when
it contains no or only a little food.
1. Switch off the appliance.
2. Remove any stored food, wrap it in
several layers of newspaper and put
it in a cool place.
3. When defrosting is completed, dry
the interior thoroughly and refit the
plug.
4. Switch on the appliance.
5. Set the temperature regulator to
obtain the maximum coldness and

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
The appliance does not
operate.
The appliance is noisy.
Audible or visual alarm is
on.
Power indicator light is
flashing.
All manuals and user guides at all-guides.com
Possible cause
The appliance is switched
off.
The mains plug is not con‐
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not sup‐
ported properly.
The cabinet has been re‐
cently switched on or the
temperature in the appli‐
ance is too high.
An error has occurred in
measuring the temperature
or the appliance is not
working properly.
run the appliance for two or three
hours using this setting.
6. Reload the previously removed food
into the compartment.

7.3 Periods of non-operation

When the appliance is not in use for long
periods, take the following precautions:
1. Switch off the appliance and
disconnect the appliance from
electricity supply.
2. Remove all food
3. Leave the lid open to prevent
unpleasant smells.
If the cabinet will be kept on,
ask somebody to check it
once in a while to prevent
the food inside from spoiling
in case of a power failure.
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect to a different elec‐
trical mains socket. Con‐
tact a qualified electrician.
Check if the appliance
stands stable.
Refer to "High Tempera‐
ture Alarm" and if the prob‐
lem still occurs contact the
nearest Authorized Service
Centre.
Contact the nearest Au‐
thorized Service Centre.
ENGLISH
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières