2. Description
The tool is an electrically-powered orbital action jig saw
for cutting wood, plastic, metal, plasterboard (drywall
panel) and fiberboard. It is designed for professional
use.
en
2.1 Correct use
The working environment may be a construction site,
workshop, occupied living accommodation or other work-
space and the work carried out may include construc-
tion, renovation or conversion.
Use of the tool for cutting materials containing asbestos
●
is not permissible.
Do not use the tool for cutting tree branches or logs.
●
Modification of the tool is not permissible.
●
The tool is intended for professional use.
●
The tool may be operated, serviced and repaired only
●
by authorized, trained personnel. This personnel
3. Tools and accessories
Saw blade
Dust removal module
Anti-splinter insert
Dust removal adaptor
Low-friction baseplate cover
Hex. socket wrench
Dust removal hood
Filter
3.1 WSJ-DRS dust removal module
3.1.1 General information
Location of identification data on the tool
The type designation and serial number can be found on
the rating plate on the tool. Make a note of this data in
your operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
department.
Type:
Serial no.:
3.1.2 Safety
Use as directed
The WSJ-DRS may be used only in conjunction with the
WSJ 850-ET and WSJ 850-EB.
Use of the WSJ DRS for materials containing asbestos
or for metal, glass and carbon fiber dust is not permis-
sible.
Use of the WSJ-DRS for damp or explosive dust is not
permissible.
14
Printed: 08.07.2013 | Doc-Nr: PUB / 5071338 / 000 / 01
All manuals and user guides at all-guides.com
WSJ-DRS
must be informed of any special hazards that may
be encountered.
The tool and its ancillary equipment may present haz-
●
ards when used incorrectly by untrained personnel or
when used not as directed.
The tool may be powered only by an electric supply
●
providing a voltage and frequency in compliance with
the specification given on its rating plate.
The items supplied include:
– Electric tool incl. saw blade
– Operating instructions,
– Packaging
– Accessories (dust removal module, anti-splinter insert,
dust removal adaptor, low-friction baseplate cover,
hex. socket wrench, dust removal hood)
W-CS
WSJ-DRS
W-ASJ SS
W-ASJ AS
W-ASJ GL
5-W-A SW5
W-ASJ AH
W-ASJ FD
3.1.3 General safety precautions
When changing the filter, hold the tool and/or the WSJ-
●
DRS so that the filter drawer can be pulled out verti-
cally downwards. This prevents dust escaping.
We recommend that breathing protection is worn when
●
changing the filter.
3.1.4 Technical data
WSJ-DRS dust removal module for the WSJ 850-ET and
WSJ 850-EB
Weight
250 g
Dimensions (LxWxH)
150x60x100 mm
3.1.5 Before use
-NOTE-
The dust removal hood must be fitted in front of the saw
blade when the dust removal module is in use (see 6.5).
Attaching the dust removal module
1. Unplug the supply cord from the electric socket.
2. Fit the dust removal adaptor into the opening on the
tool.
3. Push the dust removal adaptor toward the tool from
below until it engages.