General Information - Hilti WSJ 750 Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
WSJ 750-ET / WSJ 750-EB / WSJ 850-ET / WSJ 850-EB
orbital action jig saw and WSJ-DRS dust removal system
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions
are with the tool when it is given to other
persons.
Operating controls and parts
On / off switch
Lockbutton (only WSJ 750-ET and WSJ 850-ET)
Ventilation slots
Stroke rate adjustment thumbwheel
Dust removal system connector
Baseplate
Orbital action adjustment lever
Baseplate locking screw
Guide roller
Saw blade (insert tools)
Guard
Blade holder
Saw blade release lever
Dust removal hood
Low-friction baseplate cover
Anti-splinter insert
Contents

1. General information

2. Description
3. Tools and accessories
4. Technical data
5. Safety rules
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty – tools
12. EC declaration of conformity (original)
Printed: 08.07.2013 | Doc-Nr: PUB / 5071338 / 000 / 01
All manuals and user guides at all-guides.com
1. General information
1.1 Signal words and their meaning
-CAUTION-
Used to draw attention to a potentially dangerous situa-
tion which could lead to minor personal injury or dam-
age to the equipment or other property.
-NOTE-
Used to draw attention to an instruction or other useful
information.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
protection
Symbols
Read the
operating
instructions
before use
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
Page
In these operating instructions, the WSJ 750-ET / WSJ
13
750-EB / WSJ 850-ET / WSJ 850-EB orbital action jig
14
saw is referred to as "the tool".
14
Location of identification data on the tool
15
The type designation and serial number can be found on
16
the rating plate on the tool. Make a note of this data in
18
your operating instructions and always refer to it when
20
making an enquiry to your Hilti representative or service
21
department.
22
23 Type:
23
24
Serial no.:
Warning:
electricity
Wear Wear
eye ear
protection
Return waste
material for
recycling
These numbers refer to the corresponding illustra-
en
Warning:
hot surface
Wear Wear
protective breathing
gloves protection
13