Levelling The Appliance - tomado TDH8001W Mode D'emploi

LEVELLING THE APPLIANCE

WARNING!
• Incorrect levelling of the appliance with the adjustable feet may cause vibration, appliance moving across the room, and loud
operation.
Use a level and a spanner to level the appliance.
1. 1. Rotate the adjustable feet with a spanner.
2. Level the appliance in longitudinal and traverse direction.
CONNECTING THE APPLIANCE TO THE POWER MAINS
WARNING!
• Before connecting the appliance to the power mains, wait for at least 2 hours until room temperature has been reached.
• Connect the appliance to an earthed power outlet. After installation, the wall socket must be freely accessible.
The socket must be fitted with an earth contact (in compliance with the relevant regulations).
• Information about your appliance is indicated on the rating plate.
WARNING!
• Using an over-voltage protection to protect the appliance in case of a lightning strike, is recommended.
WARNING!
• Do not connect the appliance to the power mains using an extension cord.
i
• Do not connect the appliance to an electrical outlet intended for an electric shaver or hair dryer.
• Any repair and maintenance pertaining to safety or performance must be done by trained experts.
• A damaged power cord may only be replaced by a person authorised by the manufacturer.
EN - 30