Electrical Installation - tomado TDH8001W Mode D'emploi

INSTALLATION
• Place the appliance on a solid (concrete) base that is level and stable.
• Adjust the adjustable feet of the appliance to ensure the appliance
is standing level and balanced.
• Before connecting the appliance to the power mains, wait at least
2 hours to allow it to reach room temperature.
• Dispose the packaging materials according to local regulations.
Keep the material out of reach of children. Danger of suffocation.

ELECTRICAL INSTALLATION

• Connect the appliance to an earthed power socket protected by
a fuse that complies with the values on the rating plate.
• Particularly make sure that the appliance is not placed on the
power cord.
To avoid danger, a damaged power cord may only be replaced by
the manufacturer, its service agent or similarly qualified persons.
If the appliance is damaged, it must not be operated until it is
repaired by the manufacturer, service agent or similarly qualified
persons.
• The appliance may not be connected to the power mains using
an extension cord.
Do not connect the appliance to the power mains using an
external switch device such as a programme timer, or connect
it to a power mains that is regularly switched on and off by the
power supply provider.
• Do not connect the appliance to an electrical outlet intended for
an electric shaver or hair dryer.
• The mains plug must be accessible after installation.
Never use an extension cord or multiple plugs for making
a connection.
Do not pull the plug out of the power socket if there is flammable
gas around.
Never pull out the plug with wet hands.
Always unplug the appliance when it is not being used.
EN - 23