Exhaust Filter Maintenance; Light Bulb Replacement - Kenmore 592.30413 Manuel Du Propriétaire

EXHAUST FILTER MAINTENANCE

WARNING
Electrical Shock and Personal Injury
Hazard.
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
Note : The Exhaust Filter assists in the
filtration process to return clean
air to the room. It is located in the
Exhaust Filter Case on the front of
the cleaner.
If the Exhaust Filter becomes dirty,
remove and clean filter.
WARNING
Electrical Shock and Personal Injury
Hazard.
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
1. Using a screwdriver, remove a screw
as shown and lift off the lens.
2. Remove the bulb from the socket by
grasping bulb and pulling straight out.
3. Install the new bulb by pushing it
gently into the socket until the bulb
snaps into place.
DJ68-00514A-00.indd 14
All manuals and user guides at all-guides.com

LIGHT BULB REPLACEMENT

14
Grasp tab on exhaust filter case and
forward to remove.
Inspect the exhaust filter regularly for dust
accumulation, and clean if necessary.
The exhaust filter is not washable.
It must be cleaned in air or replaced
when it becomes dirty.
TO REPLACE LIGHT BULB
4. Reposition lens and secure with a
screw.
2009.8.22 9:19:46 AM