Axis Ip Utility - Axis 231D Guide D'installation

AXIS 231D/232D Installation Guide

AXIS IP Utility

AXIS IP Utility is a free Windows
application that discovers and displays
Axis devices on your network.
The application can also be used to
manually set a static IP address.
Note that you must install the AXIS
231D/232D on the same network
segment (physical subnet) as the
computer running AXIS IP Utility.
AXIS IP Utility is available on the CD supplied with this product, or it can be downloaded from
www.axis.com/techsup
Automatic discovery
1. Check that the AXIS 231D/232D is connected to the network and that power has been
applied.
2. Start AXIS IP Utility. When the AXIS 231D/232D appears in the window, double-click it
to open the camera's home page.
3. See page 12 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is connected
to.
2. Click the button
and IP address for the AXIS 231D/232D. The serial number is located on the product
label.
3. Click the Set IP button and then restart the AXIS 231D/232D (within 2 minutes).
4. Click View Home Page to access the AXIS 231D/232D web pages.
5. See page 12 for instructions on how to set the password.
Note:
AXIS IP Utility can be used to change a dynamically set IP address to a static one.
Set IP address using serial number and enter the serial number
Page 9