Battery Type; Storage Recommendations; Package Contents; Intended Use - BTI Profiline A-WKS 18V Notice D'utilisation

WARNING: Burn hazard. Battery liquid may
be fl ammable if exposed to spark or fl ame.
Battery Cap (fi g. 3)
A protective battery cap is supplied to cover the
contacts of a detached battery pack. Without the
protective cap in place, loose metal objects could short
circuit the contacts, causing a fi re hazard and damaging
the battery pack.
1. Take off the protective battery cap before placing
the battery pack in the charger or tool (fi g. 3A).
2. Place the protective cap over the contacts
immediately after removing the battery pack from
the charger or tool (fi g. 3B).
WARNING: Make sure the protective battery
cap is in place before storing or carrying
a detached battery pack.
Battery Pack (fi g. 1)

BATTERY TYPE

The A-WKS 18V operates on 18 volt battery packs.

Storage Recommendations

1. The best storage place is one that is cool and dry
away from direct sunlight and excess heat or cold.
2. Long storage will not harm the battery pack or
charger. Under proper conditions, they can be
stored for 5 years or more.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack show the
following pictographs:
Read instruction manual before use.
Battery charging.
Battery charged.
Battery defective.
Hot\cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
All manuals and user guides at all-guides.com

Package contents

The package contains:
1
1
1
1
1
1
1
NOTE: Battery packs and chargers are not included
with N-models.
•
•
Description (fi g. 1, 2, 8)

INTENDED USE

Your A-WKS 18V grinder is designed for professional
grinding, wire-brush and cut-off applications. DO NOT
use under humid conditions or in presence of fl ammable
liquids or gases.
61
Use only with BTI battery packs, others
may burst, causing personal injury and
damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care
for the environment.
Do not incinerate the battery pack NiMH,
NiCd+ and Li-Ion.
Charges NiMH and NiCd battery packs.
Charges Li-Ion battery packs.
See technical data for charging time.
Angle grinder
Type 27 guard
Side handle
Flange set
Two-pin spanner
Instruction manual
Exploded drawing
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand
this manual prior to operation.
WARNING: Never modify the power tool or
any part of it. Damage or personal injury could
result.
E N G L I S H