English - Paradox Security Systems ESPRIT 642BL Mode D'emploi

English

All of the Esprit 642BL LCD keypad's features and options are set
through the keypad's programming mode:
1. Press and hold the [
ENTER
2. Enter the [
]. Default: 0000
KEYPAD CODE
3. Press the key corresponding to the desired section or use the [ ] &
[ ] keys to scroll through the available sections and press [
[1] = Labels [4] = Read Key
[2] = Keypad Options [5] = Write Key
[3] = Keypad Code [6] = Set Language
[1] Labels
This option allows you to program some of the messages that appear
on the keypad's LCD screen. After entering Keypad Programming
Mode, select section [1]. Enter the three-digit value that corresponds
to the message you wish to change.
[101] to [124] = Zone 1 to Zone 24
[125] = Partition A; [126] = Partition B;
[201] to [208] = Notes
Cursor indicates the selected character. Press the [ ] or [ ] keys
to scroll the characters. Press the numerical keys from [0] to [9] to
replace the selected character. See Table 1 on page 30 on
page 30.
] key for three seconds.
[7] = Keypad Lock
[127] = Partition A & B
Indicates current character style.
Press the [2ND] key to change. See
Table 1 on page 30.
[UC] = Upper Case
[LC] = Lower Case
[SP] = Special
Esprit+ (642BL) 3
].
ENTER