Using Your Kettle - OXO BREW Mode D'emploi

1
Remove Kettle
from Base
Remove the lid by lifting from
the black knob. Fill Kettle to
desired level of water. Do not
fill beyond the "MAX" line.
2
Place Kettle
on Base
Make sure lid is locked into
a closed position before
use. Plug power cord into
1 10V/120V outlet.
3
Choose Temperature
Setting
Press and hold OXO button to
enter temperature unit menu.
Twist dial to choose between
Fahrenheit (F) or Celsius (C).
Press OXO button again to
confirm selection.
8

Using Your Kettle

Note: Your Kettle will operate only when it is
positioned on the power base with a desired
temperature selected.
Press start
The light around
the dial will start
to blink.
Twist
Select desired
temperature.
4
Set
Temperature
Press OXO button to enter
temperature setting menu. Twist
dial to choose desired water
temperature between 104°F
(40°C) and 212°F (100°C).
5
Press OXO Button
to Start
Water will be heated to your
desired temperature. It will
beep when ready and be held
for 30 minutes before switching
off automatically. To cancel at
any time, press the OXO button
during the boiling cycle.
Press to Select
Kettle will start
heating up.