Using Your Kettle - OXO BREW Mode D'emploi

1
Fill kettle
with water
Press button at top of handle
to open lid, then fill Kettle
with cold water to the desired
level (between the "MIN"
and "MAX" markings). Check
to make sure the removable
stainless steel filter is properly
snapped into frame.
2
Plug in
and flip switch
Make sure lid is locked into
a closed position before use,
and place Kettle securely on
base. Plug power cord to
1 10V/120V outlet. Flip switch
below handle. Switch will
illuminate to indicate it is on.

Using Your Kettle

8
3
Lift from base
and pour
Be sure to pour slowly to ensure
water comes out of the spout
and not the lid.
Note: Kettle will boil for 20-30
seconds before automatically
shutting off.
4
Unplug
power cord
Empty excess water from Kettle
when finished. Use cord wrap
under base for tidy storage.
Note: The kettle may be stored on
base when not in use.
CAUTION:
The Kettle appliance is
very hot during use. Do not touch Kettle
surface. Beware of burns! Use the handle
for lifting, carrying and pouring. If you
need extra support, use an oven mitt.