Using Your Kettle - OXO BREW Mode D'emploi

1
Fill Kettle
with water
Press button at top of handle
to open lid, then fill Kettle with
cold water to the desired level
(between the "MIN" and "MAX"
markings). Check to make sure
the removable stainless steel filter
is properly snapped into frame.
2
Plug in
Make sure lid is locked into a closed
position before use, and place Kettle
securely on base. Plug power cord
into 1 10V/120V outlet.
8

Using Your Kettle

Note: Your Kettle will operate only when it is positioned
on the power base with a desired temperature selected.
It will automatically switch off once the water has reached
the desired temperature and has been held for 30 minutes.
3
Set desired
temperature
Press OXO button to enter
temperature setting menu. Twist dial
to choose desired water temperature
between 104F (40C) and 212F
(100C). See page 7 for suggested
boiling temperatures. Press OXO
button to confirm selection.
4
Enjoy
Water will now be heated to your
desired temperature. It will beep
when ready, and will be held for 30
minutes. To cancel at any time, press
OXO button during the boiling cycle.
CAUTION:
Do not put the empty
Kettle back on base when in keep warm
mode. Be sure to turn base off before
returning empty Kettle to base.