Honeywell F200 Mode D'emploi page 9

AIRWATCH® Indicator Condition
No indicator on.
On/Battery indicator on continuously.
On/Battery indicator flashing.
Air Cleaner indicator flashing.
UV Air Treatment indicator flashing or
Humidifier indicator flashing.
All indicators flashing.
Table 1. AIRWATCH® Indicator LCD Description.
AIRWATCH® has no power; replace battery in AIRWATCH®
AIRWATCH® is functioning normally.
Flashing two seconds on, six seconds off: Replace battery in the RF door.
Do not press any reset buttons after battery change.
Flashing two seconds on, two seconds off: Replace battery in AIRWATCH®.
Do not press any reset buttons after battery change.
Flashing alternates between two seconds on, six seconds off; then two
seconds on, two seconds off: Replace the batteries in both units. Do not
press any reset buttons after battery change.
Signal was received from transmitter, indicating either excessive pressure
drop or 12-month timer has expired. Replace filter and press reset button
inside RF door. See Fig. 2.
UV lamp(s) or humidifier pad needs replacing. Replace parts.
On the AIRWATCH®, push and release button until desired device indicator
is flashing. Then press button again and hold until indicator comes on
continuously; then release.
System is in checkout mode. Indicators flash for two minutes, then
AIRWATCH® automatically resets.
9
F200 CHARGED-MEDIA AIR CLEANER
Meaning/Action
68-0238EF—04