English
6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
• Machine with milling cutters.
• Top handlebar.
• Fixing screws of handlebar (x8)
• Fixing wing nuts of handlebar (x8)
• Fixing washers of handlebar (x8)
• Bottom handlebar.
• Fixing screws of bottom handlebar (x2)
• Fixing nuts of bottom handlebar (x2)
• Spur
• Holding bobby pin, circlip, nuts and bolts of the
spur holder.
• Instruction manual.
6.2. ASSEMBLY
6.2.1. MOUNTING THE BOTTOM HANDLEBAR
1. Insert the screws (F) through the holes in the lower
handlebar until the tips come out through the holes on
the other side.
F
2. Install the nuts on the screws (F)
F
34/136
6.2.2. MOUNTING THE HEIGHT FILTER
6.2.3. MOUNTING THE HANDLEBAR
Install the top handlebar (A) inserting the screws (B)
with the washers (C) and tighten the knobs (D) tightly.
D
A
C
B