Clock; Childproof Lock; Changing The Basic Settings - Siemens HY738356M Notice D'utilisation

Changing the end time
Use the @ or A button to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the button to reset the end time to the current time. After
A
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the V timer, x cooking time,
clock, press the 0 button repeatedly until the
to the relevant symbol. The display shows the value for a few
seconds.

Childproof lock

The oven has a childproof lock to prevent children from
switching it on by accident.
The oven will not respond to any settings.You can still set the
clock and the timer when the childproof lock is activated.
If the type of heating and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Note: If a hob is connected, it will not be affected by the
childproof lock on the oven.

Changing the basic settings

Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting Selection 1 Selection 2 Selection 3
c1 Clock display always*
c2 Signal duration approx.
upon completion of 10 seconds
a cooking time or
timer period
c3 Waiting time until a approx.
setting is applied 2 seconds
* Factory setting
No other time-setting option should have been set.
All manuals and user guides at all-guides.com
0 button twice.
arrow.
N
y end time or 0
N arrow is next
only with -
the 0 but-
ton
approx. approx.
2 minutes* 5 minutes
approx. approx.
5 seconds* 10 seconds

Clock

After connecting the appliance to the mains or after a power
cut, the symbol and three zeros flash in the display. Set the
0
clock.
Press the 0 button.
1.
The clock in the display shows 12:00. The time symbols light
up and the arrow is next to
N
Use the or button to set the clock.
@ A
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the button four times.
0
1.
The time symbols light up in the display and the
next to .
0
Use the or button to change the clock.
@ A
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Activating the childproof lock
No cooking time or end time should be set.
Press and hold the button for approx. four seconds.
@
The @ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the @ button for approx. four seconds.
The symbol goes out in the display. The childproof lock is
@
deactivated.
Press and hold the button for approx. 4 seconds.
0
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the or button to change the basic setting.
@ A
2.
Confirm by pressing the
0
3.
The next basic setting appears in the display. You can scroll
through all levels with the 0
with the @ or A button.
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
.
0
arrow is
N
button.
button and change the setting
0 button for approx. 4 seconds.
13