DeWalt D55250 Guide D'utilisation page 5

Masquer les pouces Voir aussi pour D55250:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Improperly stored fuel could
lead to accidental ignition.
Fuel improperly secured
could get into the hands of
children or other unqualified
persons.
• unattended operation
of this product could
result in personal injury
or property damage. to
reduce the risk of fire, do
not allow the compressor
to operate unattended.
DANGER: RISk Of INjURy OR PROPERTy DAmAGE WhEN
TRANSPORTING OR STORING
WHAt CAn HAPPen
• Oil can leak or spill and could
result in fire or breathing
hazard; serious injury or
death can result. Oil leaks will
damage carpet, paint or other
surfaces in vehicles or trailers.
All manuals and user guides at all-guides.com
• Store fuel in an OSHA-
approved container, in a
secure location away from
work area.
• Always remain in attendance
with the product when it is
operating.
HoW to PreVent It
• Always place compressor
on a protective mat when
transporting to protect against
damage to vehicle from leaks.
Remove compressor from
vehicle immediately upon
arrival at your destination.
Always keep compressor level
and never lie on its side.
WARNING: RISk Of BURSTING
Air tank: The air tank on your Air Compressor is designed and may
be UM coded (for units with air tanks greater than 6 inch diameter)
according to ASME Section VIII, Div. 1 rules. All pressure vessels
should be inspected once every two years. To find your state pressure
vessels inspector, look under the Division of Labor and Industries in
the government section of a phone book or call 1-800-4-D
assistance.
The following conditions could lead to a weakening of the air tank, and
result in a violent air tank explosion:
WHAt CAn HAPPen
• Failure to properly drain
condensed water from
air tank, causing rust and
thinning of the steel air tank.
• Modifications or attempted
repairs to the air tank.
5
WALT for
e
HoW to PreVent It
• Drain air tank daily or after each
use. If air tank develops a leak,
replace it immediately with a
new air tank or replace the
entire compressor.
• Never drill into, weld, or make
any modifications to the air
tank or its attachments. Never
attempt to repair a damaged or
leaking air tank. Replace with a
new air tank.

Publicité

Table des Matières
loading

Table des Matières