Maximum / Minimum Memory; Alarm Setting - UNITEC Climate W164 Manuel De L'utilisateur

IMPORTANT NOTE
Different geographical location such as inland area
or coastal region has different weather forecasting
response. In case your weather forecast always
show rainy or stormy over a long period of time and
does not reflect the actual weather condition, it is
necessary to follow below procedure for fine tuning
the weather forecast's accuracy
1) Check the current weather condition outdoor
2) Enter altitude setting mode and adjust altitude
accordingly. Increase or decrease altitude setting
by 20m (or 60ft) each time and exit. Repeat this
step until the weather forecast icon matches with
the current outdoor weather condition.
(Eg. If the current outdoor weather is partly
cloudy, increase or decrease altitude setting until
weather forecast icon becomes partly cloudy)
IN/OUT TEMPERATURE
Temperature reading is located on the bottom of the
display.

MAXIMUM / MINIMUM MEMORY

Press MEMORY button repeatedly to view the ma-
ximum & minimum values of temperature readings.
To clear the memory record, hold MEMORY button
while the respective values are displaying on screen
TEMPERATURE TREND INDICATOR
The icons will indicate Rising, Steady, Falling if the
temperature change is more than 1 degree C (or 2
degree F) within an hour.
CLOCK & CALENDAR
Press "CLOCK" to toggle display between time,
calendar and day of the week.
Hold "CLOCK " button to enter clock setting mode.
Using"s" or "t" to adjust and "CLOCK" to con-
firm, the following values can be set in sequence:
313510_W164_Manual.indd 9
All manuals and user guides at all-guides.com
INCREASE ALTITUDE
DECREASE ALTITUDE
Press "C/F" button to select temperature unit C/ F.
Press "CHANNEL" button to select indoor, Ch1 and
auto-channel scrolling
Hold "CHANNEL" for 3 seconds to enforce se-
arching of remote sensors.
COLOR BAR GRAPH DISPLAY
The color graph display is designed as an intuitive
way to gauge the weather at a glance.
The left color bar graph represents the respective
In/Out temperature of the current display mode. As
the temperature measurements change, the number
of illuminated bars changes automatically.
Select "BACKLIGHT" slide switch to "ON" position
to turn on color display backlight continuously (This
function is available only when adapter is connec-
ted).
Select "BACKLIGHT" slide switch to "OFF" position
to turn off backlight.
12/24hr format > Hr > Min > Yr > D/M or M/D for-
mat > Month > Date > EXIT
HOME TIME, WORLD (ZONE) TIME
Hold "ZONE" to enter world (zone) time setting
mode. Press "s" or "t" to enter the desired hour
offset value from –12 to +12 hours. Press "ZONE"
to confirm each setting.
Press "ZONE" button to toggle between home
(radio-controlled) time and world (zone) time.
"ZONE" icon appears when world (zone) time
is selected. When zone time is not used, set zone
time to "0".

ALARM SETTING

Press "ALARM" to show alarm time and "AL."
icon will appear. Press again to enable or disable the
9
display modes.
English
25.11.09 10:12