Publicité
Rack
A. Unlock and remove the accessory lock and lock plate.
B. Loosen and remove the knobs and clamps.
C. With assistance from a friend lift the DoubleHaul off of the crossbars and store it in a safe place.
A. Using the 6mm hex wrench and the 13 x 19mm
open wrench, remove the end cowl from the
front portion of the DoubleHaul.
B. Using the 6mm hex wrench and the 13 x 19mm
open wrench, install the end cowl to the rear
portion of the DoubleHaul using the hardware
you removed in (A).
C. Remove the thumbscrew and bolt, then the top
and bottom mounting plates from the front
portion of the DoubleHaul.
C
D. Install the plates as shown onto the rear portion of the
DoubleHaul and loosely tighten the hardware. Make
sure the bolt head is captured in the underside channel.
D
E. Return to installation step 3.
Instruction #1035940C - Page 5 of 9
DoubleHaul
52lbs./23.5kg
A
B
=
Not more than
165 lbs. (75 kg) unless
otherwise noted.
Publicité
