Residual Heat Indicator; Daily Use; The Heat Setting; Automatic Heat Up - Electrolux EHH6340XOK Notice D'utilisation

3.4 Residual heat indicator

WARNING!
from residual heat.

4. DAILY USE

WARNING!
Refer to Safety chapters.
4.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• The hob gets too hot (e.g. when, a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• You use incorrect cookware. The
symbol
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates. See below.
The relation between heat setting and
times of the function:
• , 1 - 2— 6 hours
• 3 - 4 — 5 hours
• 5 — 4 hours
• 6 - 9 — 1.5 hours
All manuals and user guides at all-guides.com
There is a risk of burns
comes on and the cooking
comes on and the hob
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat of
the cookware.

4.3 The heat setting

Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to
deactivate the cooking zone.

4.4 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch ( comes on).
Immediately touch (
Immediately touch until the correct
heat setting comes on. After 3 seconds
comes on.
To deactivate the function: touch

4.5 Power function

This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch
. comes on.
To deactivate the function: touch
.
ENGLISH 25
comes on).
.
or