Chevrolet Performance 19370164 Manuel D'installation page 3

COOLANT TEMPERATURE SENSOR OR PLUG
SENSOR 12608814 Torque: 20nm (15lbft)
PLUG 11610259 (Thread Pitch M12X1.5) Torque: 20nm (15lbft)
PLUG
OIL PRESSURE SENSOR
There are several options available for the oil pressure sensor, although the sensor is to be installed in the location shown in the
image below. The customer should determine the correct sensor for the intended application.
Thread Pitch M16x1.5 Torque: 35nm (26lbft)
OIL PRESSURE SENSOR
AIR BLEED PIPE
There are several versions of the front air bleeds. Below are two variations with different outlet locations. The cylinder head air
bleed pipe needs to be routed to the highest point in the cooling system. This will assist in removing air from the coolant system in
the cylinder heads.
TRUCK 12694768
CAR 12602548
BOLTS 11588715 (Thread PitchM6X1) Torque: 12nm (106lbin)
TRUCK
Performance Gen III 6.0 Liter Long Block Engine
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
TEMPERATURE SENSOR
19370164
IR 20AP18
PART NO.
DATE
20AP18 Initial Release - Rocko Parker
3
SHEET
REVISION
32
OF
AUTH
N/A