Eaton Crouse-Hinds CEAG GHG 515 Mode D'emploi page 18

Code for voltage and No. of poles
acc. to UL
Voltage Colour face
2-pole + PE (PE)
125V 60Hz yellow
250V 60Hz blue
480V 60Hz red
3-pole + PE
600V 60Hz black
480V 60Hz red
250V 40Hz blue
125/250V 60Hz orange 12 h
3-pole + N + PE
600V 60Hz black
277V 60Hz red
120/208V 60Hz blue
Dimensions in mm
X = fixing dimensions
Wall socket, 4/5-pole
Plug
2 2 2 2 2
Cooper Crouse-Hinds GmbH
Annex to operating instructions
Plug and socket system 100A, GHG 515
1 1 1 1 1 T T T T T echnical data echnical data echnical data echnical data echnical data
1.1 1.1 Plug and socket GHG 515 Plug and socket GHG 515
1.1 1.1 1.1 Plug and socket GHG 515 Plug and socket GHG 515 Plug and socket GHG 515
Explosion category:
for USL
for CNL
Certifications and Compliances:
for CNL
Rated voltage:
Rated current:
Back-up fuse:
without thermal protection
Clock
with thermal protection
Switching capacity:
Perm. ambient temperature:
4 h
Special versions permit deviating temperatures.
6 h
Perm. storage temperature in original packing:
7 h
Protection category acc. to IEC 60529
with closed and secured hinged cover as well
as combinations properly plugged together
5 h
Insulation class acc. to IEC 61140:
7 h
Cable entry:
9 h
Wall socket
plug
Supply terminal:
Wall socket
5 h
Plug
7 h
9 h
Min. cross section / Supply terminal
for 100A rated current
for 125A rated current
Test torques:
Cap nut of the M63 entry
Cover screws
Terminals, plug
Terminals, wall socket
Self-cutting screws size 5
Weight (standard version):
Wall socket
Plug
Auxiliary contact:
Rated voltage:
Rated current:
Switching capacity:
AEx de II C T6
Ex de II C T6
Class I, Zone 1
Class I, Division 2 -
Class II, Division 1 -
up to 600 V, 60 Hz
max. 100 A
max. 100 A
max. 125 A gL
690V / 100 A
-20° C to + 40° C (catalogue version)
-55° C to + 80° C
IP 66 (catalogue version)
I - is complied with by the devices
(catalogue version)
2 x M50, (1 x hub M50 / 1/2" NPT, 1 x blanking plug)
Ø 21-48 mm (Ø 31-58 mm)
2 x AWG 11 - 00 (max 1xAWG 0000)*
1 x AWG 11 - 2 with pin cable lugs 1xAWG1
* (use cable lugs supplied)
Observe current load !
Wall socket
1x 50 mm²
1x 70 mm²
Ø min. 22.0 Nm / Ø max. 5.00 Nm
2.5 Nm
4.5 Nm
6.0 Nm
3.0 Nm
4-pole
ca. 12.30 kg
ca. 0.90 kg
690 V AC
20 A
AC 15 400 V / 6 A
DC 13 24 V / 2 A
Contact arrangement
4-pole
5-pole
w/o auxiliary contact
contact
Groups A, B, C and D
Groups F and G
Plug
1x AWG 2
1x AWG 1
5-pole
ca. 13.00 kg
ca. 1.20 kg
with auxiliary