Display Symbols - Brink 614687-F Manuel

Example of changing setpoint RH and temperature duct
mode
•
Press the
•
Scroll with the arrow keys to SETPNT.
mode
•
Press
•
Scroll with the arrow keys to SP001 for temperature and SP002 for RH.
mode
•
Press
•
Use the arrow buttons to change the values
mode
•
Press
•
Use to confirm value.
2.2

Display symbols

Symbols general:
•
Wireless Communication: displays the signal strength.
•
Battery: remaining life of the batteries (4 x AAA).
•
Alarm: the text indicates signal. Look under Faults for explanation.
•
Demand: the level of operation, the higher the demand the more bars.
Symbols relevant for the Brink Evap:
•
Humidify: humidify function
•
Heat: heat function. This does not mean that this is actually on or that it is present
Section 2 – Controller menu
button for 2 seconds.
to select menu.
to select submenu SP001/SP002.
to confirm value.
2 – Controller
Evap controller
4