Activate The Controller Display - Brink 614687-F Manuel

1.3

Activate the controller display

Activate the Evap controller display:
mode
•
Press
Seting the controller on RH (relative humidity)-mode:
•
Press after activating, with the arrow button to setting HUM101.
mode
•
Press
•
On the screen a faucet is visible, the Evap is now in the humidity-setting.
Change RH setpoint:
•
Activate the controller by pressing
•
Ensure that the RH value is visible by pressing
•
Then press the arrow button to change the RH setpoint.
mode
•
Press
Change temperature setpoint is not applicable for the Brink Evap
Section 1 - Operation
to confirm.
mode
to confirm the new value.
.
Evap controller
2