Care And Cleaning; Troubleshooting - ETI Grow Elite GEGL-30WHU-FS Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and Cleaning

CaUtiOn: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the
fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

troubleshooting

Before doing any work on the fixture, disconnect power to the light fixture.
WarninG:
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the circuit breaker
trips when the light is turned on.
Possible Cause
The power is off.
The circuit breaker is off.
There is a defective switch.
The power cord is loose.
The power cord is grounding out.
Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Contact a qualified electrician.
Remove the power cord from the outlet. Ensure
the power cord is firmly inserted into the
GrowElite
®
light fixture and then plug the other end
of the power cord back into the outlet.
Contact a qualified electrician or call customer
service 1 (800) 916-7680.
Questions, problems, missing parts?
Call Grow Elite Customer Service
8 a.m. - 5 p.m., ET, Monday - Friday
1 (800) 916-7680
www.GrowEliteLED.com
Retain this manual for future use.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

554221110

Table des Matières