Linking Multiple Plant Lights - ETI Grow Elite GEGL-30WHU-FS Guide D'utilisation Et D'entretien

linking Multiple plant lights

Multiple light fixtures can be connected, up to a maximum of ten plant lights or 300 total watts. Only the first light fixture needs to be
plugged into an electrical outlet.
□ Connect each additional fixture using either the linking cable (F). The maximum distance between two light fixtures is 3 ft.
□ Remove the end cap from the plant light b efore connecting the product.
□ For best results, fully insert the linking cable (F) into the receptacle in the end of the plant light.
WarninG: RISK OF ELECTRIC SHOCK. Disconnect power to the plant light before linking additional plant lights. If the receptacle on the end of the
plant light is not used to link to another fixture, the receptacle needs to be closed by the end cap. Do not touch live parts inside the receptacle.
A 1
A 1
F
A 2
F
A 2
6
E
E