Samba DSD EVOLU 7 Line Guide D'utilisation page 23

Contents
1. Instruction - Page 24
1.1 Basic function of the system - Page 24
1.2 Main panel diagram - Page 25
1.3 Specification of main panel - Page 25
1.4 Packing list - Page 25
2. Installation - Page 26
2.1 Installation of main panel - Page 26
2.2 Installing door/window magnetic contact - Page 27
2.3 Installation of P.I.R. - Page 27
2.4 Installation of gas detector - Page 28
2.5 Installation of wireless outdoor siren - Page 30
3. Operation - Page 31
3.1 Record alarm voice message - Page 31
3.2 Enter setting - Page 31
3.3 Exit setting - Page 31
3.4 Setup main panel - Page 31
3.4.1 Set 6 groups of alarm phone numbers - Page 31
3.4.2 Delete alarm phone number - Page 32
3.4.3 Change password - Page 32
3.4.4 Set ring times before answering the remote calling - Page 32
3.4.5 Set the sounding time of siren when the alarm is activated - Page 32
3.4.6 Set siren On when the alarm is activated - Page 32
3.4.7 Set siren Off when the alarm is activated - Page 32
3.4.8 Alarm is activated when the phone line is broken - Page 32
3.4.9 Alarm is not activated when the phone line is broken - Page 32
3.4.10 Set siren prompt on when arm/disarm - Page 32
3.4.11 Set siren prompt off when arm/disarm - Page 33
3.4.12 Set the user ID of main panel - Page 33
3.4.13 Set alarm center phone number - Page 33
3.5 Coding detectors with main unit - Page 33
3.5.1 Enter coding mode - Page 33
3.5.2 Exit coding mode - Page 33
3.5.3 Coding process of wireless detectors - Page 33
3.5.4 Recode all the detectors - Page 34
3.5.5 Adding more sensors - Page 34
3.6 Arm/ Disarm by keypad on main panel - Page 34
3.7 Remote arm/disarm and monitor - Page 35
3.8 Alarm activated, answer and release - Page 35
4. Usage of wireless remote controller - Page 35
5. Technical parameters for wireless detectors - Page 36
6. Operation Cautions - Page 38
7. Frequency Questions & Answers - Page 38
-- - 23 --