Marshalltown Bullet EZ Serie Mode D'emploi page 2

INTRODUCTION
Thank you for purchasing the EZ Siding Shear. This versatile, economical, light-duty shear is manufactured in the
USA with the highest-grade materials and is designed with the siding professional in mind to cut HardiePlank®,
vinyl, and many other materials quickly, easily, and without dust.
Your new EZ Siding Shear includes features such as:
• Ability to cut inside without dust, noise, or electrical cords
• Metal jacketed bearing for long tool life
• For 20"—built-in ruler and movable fence for 45° (up to 8"/18" wide) and 90° cuts
• For 26"—multi-position aluminum fence at pre-marked roof pitches
• A blade that outlasts 20 saw blades
• Strong, lightweight aircraft grade aluminum construction
• The 20" & 26" EZ Shear also have a double F-beam construction
• Reduces airborne silica dust below OSHA minimum thresholds for PPE
And can cut materials up to 1" thick and 20"/26" wide, including:
• Fiber cement board siding
• Pressboard lap
• Vinyl siding
• Wood siding
• OSB trim
• Fiber cement trim
• Vinyl trim
• PVC trim
• Tar & wood shingles
This owner's manual provides the information needed to operate and maintain this EZ Siding Shear. Carefully
read and follow all safety and operating instructions in this manual. Ensure every operator of this shear reads
this manual before operating the unit. The replacement of any part on this shear with a component other than
a manufacturer authorized replacement part may adversely affect the performance, durability, or safety of the
product.
Be sure safety precautions are observed. Read and follow all safety and operating instructions in this operator's
manual. The manufacturer reserves the right to make changes on or add improvements to its product at any
time without prior notice or obligation. The manufacturer reserves the right to decide, upon its sole discretion
and at any time, to discontinue this product or replacement parts thereof.
This manual covers the EZ Siding Shear. For technical questions or repair parts, please call MARSHALLTOWN
customer service at 1-800-888-0127 or visit www.MARSHALLTOWN.com.
2 of 16
WS2647revA
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com