Topmount - Westinghouse QK045 Manuel De L'utilisateur

Installation
TOPMOUNT INSTALLATION
PREPARING THE AREA
NOTE:
Top-mounted sinks are installed from above the counter.
- Place the supplied template (1A) in a desired area on the
counter top so that it is parallel to the front .
- Ensure that the cutout will not interfere with the base
cabinet below .
- In addition, ensure that at least 1" of counter surface is
available all around the cutout below so the sink can be
secured to the counter using supplied topmount clips .
QK045
All manuals and user guides at all-guides.com
Tape
1A
CUTTING THE COUNTER
CAUTION: Always wear safety goggles and gloves when
using power tools to prevent personal injury .
- Secure the template (1A) to the counter top using
masking tape .
- Place a support underneath the cutout area to prevent
it from falling during cutting . Drill a starter hole
through the template and the counter large enough to
accommodate the blade of your saw . Use a saber or jig
saw to cut along the edge of the template and remove
the cutout .
- Insert the sink (A) into the cutout in the counter to test
the fit. Make adjustments to the cutout, if necessary.
A
Cutline
6 6