Pre-Installation; Planning Installation; Tools/Materials Required; Parts Required - Westinghouse QK045 Manuel De L'utilisateur

Pre-Installation

PLANNING INSTALLATION

Carefully check all components for damages and/or missing parts prior to installation . If there are any damages or if you are missing parts, do not
proceed with the installation . Report damages and/or missing parts immediately to our customer service at 1-877-333-0098 . Do not dispose of
packaging before you are satisfied with your new sink.
This sink is intended to be installed in a base cabinet of at least 36 in. (914mm) in length and a counter top of at least 0.75 in. (19mm) in
thickness .
Protect the entire surface of the product during installation to prevent damage .

TOOLS/MATERIALS REQUIRED

Measuring tape
Saber-saw or
Jig-saw
100% Silicone
sealant
Flathead
screwdriver
Safety gloves
PARTS REQUIRED (NOT INLCUDED)
NOTE:
Parts not shown to actual size.
QK045
All manuals and user guides at all-guides.com
Plastic
Tail pipe (1)
flange (1)
4 4
Carpenter's square
Electric drill with 0.5
in. (12 mm) drill bit
Pencil
Hacksaw
Phillips
screwdriver
Connecting
nut (1)
Wrenches (2)
Pipe wrench
Teflon tape
Safety goggles
Plumber's putty
Supply lines (2)