Phottix Strato TTL Manuel D'utilisation page 8

2 . C h a n n e l s c a n b e s e t o n b o t h t h e
transmitter and receiver.
Setting Channels on the Transmitter
1. Press the Channel Selection Button on the
transmitter.
2. Each press of the button will cycle through
channels 1, 2, 3, 4.
3. Make sure the transmitter channel is the
same as the receivers.
4. Channels are visible on the transmitter LCD.
Setting Channels on the Receiver
1. Move the Channel Selection Switch to
8
All manuals and user guides at all-guides.com
Connecting Strato TTL transmitter to
the camera hot shoe
settings 1, 2, 3, or 4.
2. Make sure the receiver is set to the same
channel as the transmitter.
1. Turn off the camera and Strato T TL
transmitter.
2. Slide the Strato TTL transmitter into the
camera's hot shoe mount.
3. Turn the Strato TTL locking ring until tight.
4. Turn on the Strato TTL transmitter.
5. Turn on the camera and set the shooting
mode.