Cutting Depth Adjustment; Power Connection - sunjoe AJ801E Mode D'emploi

Removing + Emptying the Thatch
Collection Bag
Empty the thatch collection bag frequently during use. Do not
wait until it is completely full. We recommend emptying it when
it is half full.
1. Lift the thatch collection bag cover and pull the thatch
collection bag off the mounting hooks to remove it.
2. Empty the bag's contents into a suitable waste receptacle.
Mount the bag back into position before resuming work.
Operation

Cutting Depth Adjustment

m
WARNING!
The unit must be switched off and
disconnected from the power supply before adjusting the
tine settings.
Adjust the depth according to the needs of your lawn. The
most suitable depth depends on the kind of lawn and the
actual height of the grass.
1. Push the depth adjustment lever towards the wheel, then
move it forward or backward to adjust the cutting depth
(Fig. 8).
Fig. 8
Wheel
Scale/
Setting
Position
1 high
2 minimal
3
middle
4
deep
5 deep
Depth
adjustment
lever
Depth
10 mm do not use for scarifying
5 mm do not use for scarifying
0 mm transport, storage and scarifying
-5 mm use for scarifying
-10 mm use for scarifying
2. Adjust the lever to one out of five stages. Read the
adjusted depth from the scale (Fig. 9).
Fig. 9

Power Connection

Push a loop of the extension cord through the slot on the
extension cord restraint holder from the opposite side of the
restraint holder (Fig. 10). Insert the appliance cord into a proper
outdoor extension cord (see Extension Cord Chart on page 2).
Fig. 10
Extension
cord restraint
holder
Application
Scarifying
9
Extension
cord
Raking
for pushing behind with the machine; and
removing thin thatch layers
raking healthy lawn
transport, storage and raking
not recommended for raking
do not use for raking