1
Safety Notes
1.1
Intended use
The digital inspection camera is suitable for inspecting hard to reach locations or dark areas. After
mounting the provided accessories to the camera head, it is also suitable for moving and removing
small and light objects (e.g., small screws).
The digital inspection camera may not be used for medicinal purposes. It is also not suitable for re-
pairing pipe clogs or pulling in cables.
The light in the camera head is intended to illuminate the direct work area of the digital inspection
camera and is not suitable for household room illumination.
1.2
Safety instructions
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
- Have the inspection camera repaired only through a qualified repair person and only using
identical replacement parts. This will ensure that the safety of the inspection camera is main-
tained.
- Do not operate the inspection camera in explosive atmospheres, such as in the presence of
flammable liquids, gases or dusts. Sparks can be created in the inspection camera which may
ignite the dust or fumes.
- Do not direct the light beam at persons or animals and do not stare into the light beam
yourself (not even from a distance).
- Check the working range before using the inspection camera. No part of the inspection
camera may come into contact with electrical lines, moving parts or chemical substances.
Interrupt the power circuit of electrical lines in the working range. These measures reduce the
risk of explosion, electric shock and property damage.
- Wear appropriate protective equipment such as safety glasses/goggles, protective gloves or
respirator when materials that are hazardous to one's health are in the working range. Sewer
lines or similar areas can contain solid, liquid or gaseous substances, which may be toxic, infec-
tious, caustic or otherwise hazard to one's health.
- Pay particular attention to cleanness when working in areas with substances that are haz-
ardous to one's health. Do not eat during work. Avoid contact with substances that are hazard-
ous to one's health. After finishing your work, wash hands and other affected body parts that may
have come into contact, with warm soapy water.
- Do not stand in water when using the inspection camera. When standing in water while work-
ing, there is a risk of electric shock.
Magnet:
Keep the magnet away from cardiac pacemakers. The magnet generates a field that
can impair the function of cardiac pacemakers.
- Keep the magnet away from magnetic data medium and magnetically-sensitive equipment.
The effect of the magnetic can lead to irreversible data loss.
8
ENGLISH