Storage And Maintenance - Sanitas SFT 65 Mode D'emploi

Masquer les pouces Voir aussi pour SFT 65:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
1.
Loosen the screw on the battery compartment lid and pull the
lid off downwards.
2.
Remove the used batteries and insert two new batteries in
the direction indicated.
3.
Place the battery compartment lid back on and screw it
closed.
Dispose of used batteries in accordance with the applicable
legal regulations. Never dispose of batteries in the normal
household waste.
9

Storage and maintenance

Clean the sensor tip after each use. Use a clean cloth or cotton bud that can be moistened with disinfect-
ant, alcohol or warm water.
To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solution.
Do not use any harsh cleaning products.
Always store the thermometer with the forehead/cover cap on.
If prolonged storage is intended, you should remove the battery.
The device must not be stored or used at an excessively high or low temperature or humidity (see techni-
cal data), in sunlight, in association with an electrical current or in dusty locations. Otherwise inaccuracies
can occur.
The device must be tested for accuracy (calibrated) after 2 years. Please send the complete device to the
retailer's or service address..
All manuals and user guides at all-guides.com
27

Publicité

Table des Matières
loading

Table des Matières