Replacing The Battery - Sanitas SFT 65 Mode D'emploi

The temperature last measured, i.e. only the last value of a series of measurements, is automatically stored
as soon as the thermometer switches itself off or is switched off. There are 10 memory spaces available for
this.
To switch the thermometer off, press the
If you do not press any other buttons, the thermometer automatically switches off approx. one minute after
displaying the measured value.
To call up the saved values, switch the thermometer on and press the
The date, time, storage space number, the measurement mode symbol and the temperature are displayed in
turn. Browse through the stored measurements by pressing the
8

replacing the battery

When the batteries get weak, the battery warning symbol appears
temperature. The batteries must be replaced. When the battery symbol flashes
the display, the batteries must be replaced. If the batteries are too flat, then the thermometer will switch off
automatically.
note:
• When changing the batteries, use batteries of the same type, make and capacity.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.
26
All manuals and user guides at all-guides.com
and buttons simultaneously for approx. 3 seconds.
button.
button repeatedly.
. It is still possible to measure
and Lo appears in