Sanitas SFT 65 Mode D'emploi page 25

Measuring body temperature on the forehead
If the measured value is within the normal range (< 100.4°F/38°C), the green LED lights up for 3 seconds. If
the measured value is higher (≥ 100.4°F/38°C, high temperature), the red LED is illuminated.
Measuring surface temperature
• Press the button for 1 second to switch the thermometer on. Following a successful self test, the
device emits two short beeps.
• Then press the
mode. The symbol appears in the display.
• Press and hold the
ured (never immerse in liquids), maintaining a distance of 3 cm.
• Release the or
measured value appears on the display.
Please note that the displayed temperature is the measured and not the adapted surface temperature. It is
not the same as the forehead/ear temperature.
To switch back to the Ear/Forehead thermometer mode, press the
seconds until the symbol disappears and there is a short beep. By switching the thermometer off and on
again, it automatically exits the Object temperature mode.
All manuals and user guides at all-guides.com
Please note that the forehead/temples must be free from sweat and cosmetics and
that taking vasoconstrictive medication and skin irritations can distort the result
when measuring temperature on the forehead.
• Press the button for 1 second to switch the thermometer on. Following a
successful self test, the device emits two short beeps.
• Place the measuring head with the forehead/cover cap fi tted on the temples,
hold down the
forehead to the other temple.
• Then release the
short beep and the measured value appears on the display.
and buttons simultaneously for 3 seconds to switch to the Object temperature
or button and point the sensor tip towards to the object or liquid to be meas-
button. The end of the measuring time is signalled with a short beep and the
button and move the thermometer smoothly over the
button. The end of the measuring time is signalled with a
and buttons simultaneously for 3
25