Safety Instructions - Teamtex RANGER SL Mode D'emploi

Safety instructions

· If your car is fitted with a rear folding seat, check that it is securely locked
in the upright position.
· It is dangerous to modify or add to the car seat in any way without approval
from the appropriate authority, or not to carefully follow the instructions
for installation provided by the child seat manufacturer.
· Direct exposure to the sun increases the temperature inside the vehicle.
You should therefore cover the car seat when it is empty so that the parts,
especially the buckles, do not heat up and burn the child.
· Always remember to check that there is no food or other waste in the harness
buckle or the central adjuster.
· Always transport a child using the child car seat, fitted correctly, including
for short journeys.
· Tell your child that he/she must never play with the belt buckle.
· If in doubt over the installation and correct use of your car seat,
please contact the manufacturer.
· Do not leave a child unattended in a car seat.
· The correct installation of the car seat is vital to its' performance in an
accident to keep your child safe. Ensure you follow the instructions carefully
and correctly, and ensure any other users understand the importance of
following the instructions carefully.
· Do not use weight-bearing contact points other than those specified
in the instruction manual or indicated on the car seat.
· It may happen that the vehicle seat belt buckle is too long and interfere
with the main weight-bearing contact points on the child safety seat. In this case
the seat must not be fixed on that seat but must be installed on another seat
on which there is no problem. If in doubt, please contact the car seat manufacturer.
· Please read the car manufacturer's carefully handbook before installing this
ISOFIX child safety seat.
EN
02
22