Parts & Assembly - NOSTALGIA PRODUCTS CLSC1AQ Instructions Et Recettes

PARTS & ASSEMBLY
ASSEMBLY
Your CLASSIC RETRO SINGLE SNOW CONE MAKER requires very little assembly.
• Before first use, lift the removable top off of the body and wipe clean
the inside of the unit with a non-abrasive moist sponge, a non-abrasive
towel, or a damp cloth followed by a non-abrasive dry towel.
• After cleaning the inside, put the top back on the base of the unit.
• Now you are ready to enjoy cool, refreshing icy snacks from
your CLASSIC RETRO SINGLE SNOW CONE MAKER!
Power Gauge
Plastic Cone
5
Ice Hopper/
Locking Lid
Spout
Snow Cone Holder
Attach knob lever on side of cotton
candy maker as shown on image to
the left. CAUTION: DO NOT ATTACH
LEVER IF UNIT IS PLUGGED IN
ON/OFF Lever