Parts & Assembly - NOSTALGIA PRODUCTS NCCA5 Instructions Et Recettes

PARTS & ASSEMBLY
Parts
Heated
Base
Topping
Trays
Apple
Sticks
Assembly
1. Thread the power cord of the heated base through the center of the carousel, then
set the heated base into the center of the carousel. To keep the unit level, make
sure the power cord is placed into the notch in the bottom of the carousel.
2. Set the melting pot into the center of the heated base, and set the melting pot lid
3. Place the topping trays and decorating trays into the slots on the outside of the carousel.
5
Melting
Pot
Lazy Susan
Carousel
Decorating
Trays
Melting
Pot Lid