Indoor Unit; Screen Configuration; Setting The Day Of The Week And Time; Turning On/Off - Mitsubishi Electric CITY MULTI PLFY-P VBM-E Serie Manuel D'utilisation

2. Parts Names

Indoor Unit

Fan steps
Vane
Louver
Filter
Filter cleaning indication

3. Screen Configuration

Function Selection of remote controller
Standard Control Screens
OFF
Timer Monitor
MON
TIMER
OFF
˚F˚C
WEEKLY

4. Setting the Day of the Week and Time

TIME SUN
°C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
5. Operation
°C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
4
PLFY-P . VBM-E
4 steps
Auto with swing
–
Long-life
2,500 hr
Set Day/Time
TIME SUN
˚F˚C
˚C
ON
Timer Setup
SUN MON TUE WED THU FRI SAT
Day of the week and
time display
°C
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
°C
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
Air outlet
Vane
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
Function Selection of remote controller:
Set Day/Time:
Standard Control Screens:
Timer Monitor:
Timer Setup:
<How to change the screen>
: Hold down both the Mode button and the Timer On/Off button for 2
seconds.
WEEKLY
: Press the Timer Menu button.
: Press the Mode (Return) button.
: Press either of the Set Time buttons (
1. Press the or
2. Press the Timer On/Off (Set Day) button
* Each press advances the day shown at
Sun Mon ...
3. Press the appropriate Set Time button
* As you hold the button down, the time (at
one-minute intervals, then in ten-minute intervals, and then in one-
hour intervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button to lock in the values.

5.1. Turning ON/OFF

<To Start Operation>
Press the ON/OFF button
• The ON lamp
Note:
When the unit is restarted, initial settings are as follows.
Mode
Temperature setting
Fan speed
Airflow up/down
Filter
Air intake
Set the functions and ranges available to the
remote controller (timer functions, operating
restrictions, etc.)
Set the current day of the week or time.
View and set the air conditioning system's op-
erating status
View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
Set the operation of any of the timers (weekly
timer, simple timer or Auto Off timer).
or ).
Day of the week Setting
TIME SUN
Time Setting
Set Time button to show display
to set the day.
:
Fri Sat.
as necessary to set the time.
) will increment first in
.
and the display area come on.
Remote Controller settings
Last operation mode
Last set temperature
Last set fan speed
Last setting
.