Yakima CaddyYak Instructions De Montage page 16

16
UNCLASP THE PIN
and remove it
from the hitch
(if it is installed).
Attach hitch to the side
17
of the bike without the
drive-train (gears).
TURN THE SOCKET TO A SHARP ANGLE,
LANYARD FACING OUT:
• Make sure the hitch socket is free of debris
• The ball on the end of the skewer must nest
completely inside the hitch.
18
SECURE THE HITCH WITH PIN AND SAFETY CLIP.
Thread the safety strap through the bike
19
frame and clasp the loop on the arm.
1033077B-16/38
• Insert pin into hole.
• Attach safety clip to end of pin.
If the lanyard interferes with any moving parts,
it can be cut and removed from the hitch.
OK
Test the hitch installation by pulling and twisting
the arm. If it comes out, repeat the installation.
16