Install The Wheels - Yakima CaddyYak Instructions De Montage

INSTALL THE WHEELS:

8
Inflate the tires to 35 psi.
9
Insert the wheels into the trailer axle.
CaddyYak
owners:
• Depress the center button while
inserting the wheel post into the axle
center.
• Test the security by pulling on each
of the wheels.
If the wheel can be pulled out, depress
the button and push further into the
center of the axle until you hear a snap.
1033077B-13/38
Failure to properly inflate your tires may lead to loss of
control of the bike and serious injury or death!
TotRod
owners:
• Insert the wheel
post into the
axle center.
INSIDE THE TRAILER:
Test the wheel installation by pulling on the
wheel. If it comes out, repeat the installation.
13
• Slide the axle pins
into the hubs (front
to rear of trailer).
The tip of the axle must be
visible inside the trailer
before inserting the pin.
• Flip the pins so that
they encircle the
axles as shown.