Carrera CRR ICE-213 Mode D'emploi page 47

4. use the flat-headed screwdriver to push the parts of the
housing apart in the area around the connector
5. use the flat-headed screwdriver to lift the plastic housing
out of the other half of the housing
6. slide the flat-headed screwdriver in between the plastic
housing parts, release the locking latches on both sides
and remove the bottom half
7. lever the plate out of the inner housing and bend up-
wards along with the batteries
8. separate the batteries from the board with the wire cutters
. dispose of the batteries separately! (→ 11. disposal).
➏
the nickel-metal hydride batteries used for this de-
vice may not be treated as household waste. the bat-
teries must be disposed of properly. contact battery
nimH
distributors or local waste disposal points for this.
All manuals and user guides at all-guides.com
➍
➊
➍
.
➌
.
.
➎
➋
➎
.
➋
➌
➏
47