Carrera CRR ICE-213 Mode D'emploi page 42

wet Cleaning with "Lift & wash" function:
1. press the release buttons (4). the blade head frame will
automatically slide into "lift & wash" position
2. Hold the shaver head under warm, running water (no
hotter than 70 °c), in such a way that the water can run
through the opening
3. For increased cleaning effectiveness you can also use regular
liquid soap. rinse thoroughly under warm, running water.
4. allow the shaver to dry completely before replacing the
blade head.
5. every now and again you should spread a drop of scissor
or sewing machine oil on the cutting blades and the long
hair trimmer to keep them
in good working order.
6. wipe the housing down with a soft, damp cloth.
7. Hold the blade head on the sides and press it down until
it locks into place.
8. replace the protective cap (10) or trimmer cap (9).
➙
➊ Release buttons
NOTE: From time to time, place a few drops of acid-free oil (such
as sewing machine oil) onto the cutting blades and the hair clip-
per. let the device run for a couple of seconds without using it.
using a soft cloth, wipe off the surplus oil, if necessary.
42
All manuals and user guides at all-guides.com
.
➋
➙
➋ Rinsing
.
➊