Carrera CRR ICE-213 Mode D'emploi page 40

Trimming Long Hair
use the long hair trimmer on the rear of the shaver to shorten
beard and sideburns.
1. take off the protective cap.
2. push the long hair trimmer upward.
3. use the on / off switch
4. after use, switch off the shaver, push the long hair trimmer
into its basic position and clean the shaver (→ 06. cleaning
and care).
Three- / five-Day beard shaver
You can use the long hair trimmer (11) and the trimmer
Q
cap (9) to shave a three or five day beard.
1. click the trimmer cap (9) onto the blade head (2).
2. slide the long hair trimmer (11) into the desired position:
– position 1 will produce a beard length of approximately
4 mm (five-day beard)
– position 2 will produce a beard length of approximately
2 mm (three-day beard)
NOTE: when using the trimmer cap, there is no direct contact
between the shaving foil and the skin. this means that the blade
system will not receive its usual natural tallow lubrication.
3. to ensure that your shaver continues to provide you with
lasting shaving quality, be sure to apply a drop of scissor
or sewing machine oil on the foils after having cleaned the
shaver after use. remove the trimmer cap (9) by pressing
the unlocking buttons (8) on both sides and pull off the
trimmer cap.
40
All manuals and user guides at all-guides.com
;
(5) to switch on the shaver.