Cleaning Your Grinder - OXO Brew Mode D'emploi

1
Unplug
Grinder
Always unplug power cord from outlet
before removing or replacing hopper.
2
Remove
Hopper
Press down on hopper release lever
and twist hopper counterclockwise.
Lift to remove. The "trap door" feature
will keep beans securely inside while
hopper is removed.
3
Remove
Upper Burr
Lift metal burr handle and twist
counterclockwise, then pull straight up.
Note: Only the upper burr is removable.

Cleaning Your Grinder

Always unplug your Grinder before cleaning it. Any service or maintenance other than
cleaning or descaling should be performed by an authorized service representative.
For more information, call OXO Customer Service at (800) 545-4411.
4
Use a small bristle brush. Ensure burrs
are clear of beans. Never use water or
other liquids to clean the inside of the
Grinder/burrs.
Do not use abrasive pads, harsh chemicals or
spray cleaner chemicals to clean. These may damage
the surface of the appliance. Do not put any part of
your Grinder in the dishwasher.
5
Align indents in burr with tabs inside
lower burr. Push upper burr straight into
grinder and turn handle clockwise, until
you hear a click. To test burr installment,
pull handle straight up. If properly
positioned, burr will stay in place.
Note: If coffee beans have not been emptied
from area around burrs, burr may not lock into
place properly.
Clean burrs
and grounds chute
Replace
Upper Burr
6
Wipe Base
and Body
Clean Grinder exterior with
a soft, damp cloth.
7
Replace
Hopper
Twist hopper clockwise onto
Grinder until the line above the
lever aligns with the icon and
release button clicks into place.
11