OXO Brew Mode D'emploi page 10

Zeroing and More
To Zero Scale or Switch Grounds Container
If you prefer to use your own container and/or grinder
without the steel plate, you will need to set the scale
to zero with the container on the scale. Once finished,
the Grinder will now read the new container and will
display a "0 g" or "0
again, repeat the steps above with the new container.
Place Press & hold
container button until 3 second
on the base countdown starts
Notes
• Grinder will default to last mode used.
• When in Cups Mode or Grams Mode, make sure to place the
stainless steel plate, container, and lid on the base. Otherwise,
the Grinder will not work properly.
• Do not touch the container or shake the Grinder while grinding,
as it will affect the reading on the scale.
• You cannot adjust the number of cups or grams while grinding,
but you can stop the grinding process at any time by pushing
the OXO button, and then adjust the amount.
• Grinder will go into sleep mode after 20 seconds of no activity.
10
". If you change the container
Release button
when countdown
reaches 0
Caring for Your Grinder
Let the Grinder Cool
Allow Grinder to cool for at least 2 minutes after
each use. Do not operate this appliance for longer
than 4 minutes at a time to prevent overheating. Allow
the appliance to cool down 10-15 minutes after long
operation. If the motor overheats, the Grinder will
stop working and the display will show a 30 minute
countdown. Wait until the countdown has ended
before using the Grinder again.
Clear Chute Between Uses
If you don't grind regularly, make sure to clear the
ground coffee from the chute before each use.
Use Fresh Beans
Old/dry beans will create static which can result in
dust sticking to walls of Grinder. Do not store beans in
the bean hopper for an extended period of time. We
recommend grinding only coffee in this Grinder.
Hand wash
hopper, grounds container
and steel plate. Rinse and
dry thoroughly.