Table des Matières
Publicité
mountinG the lp tanK braCKet
3
Mount the LP tank bracket to the right hand side of the enclosure
opening using non corrosive hardware. Mounting holes are provided
on the sides and bottom of your LP tank bracket. Be sure to mount the
bracket securley to the enclosure before use. mountinG hardware
not inCluded.
◆
mountinG the lp hose and reGulator
4
Securley mount the hose and regulator bracket to the top of the built-in
tank enclosure using non corrosive hardware. mountinG hardware
not inCluded.
◆
lp tanK enClosure Gas line loCations
Area should be kept clear of sharp, jagged, or extremely abrasive
surfaces to avoid possible damage to gas supply lines. Exercise caution
when pulling gas lines through built-in structure.
bUILT-IN TaNK ENcLoSUrE aSSEmbLY
◆
WWW.WEbEr.com
®
29
Publicité
Table des Matières
