Power Source; Listening To Records - GPO PR100 Mode D'emploi

POWER SOURCE

This unit is designed to operate on a normal AC 100V ~ 240V, 50/60
Hz household power supply. Do not attempt to operate the system
using other power sources. This may result in damage to the unit and
void your warranty.

LISTENING TO RECORDS

1. Ensure the unit is placed on a flat surface.
2. Carefully open the turntable lid.
3. P ress On/Standby button on rear panel of turntable to operate.
The Bluetooth light flashes on bottom right corner of turntable.
4. Select PHONO / EQ THRU 'On' (14) on rear of unit.
5. P lace a record on turntable over the central spindle (Place the 45
RPM adapter over the central spindle when playing 45-RPM vinyl).
6. S et the Speed Selector to 33 or 45 RPM according to the record.
7. A uto-Stop, ON & OFF
• Set the button to "OFF" , there will be no movement.
• Set the button to "Auto-Stop", turntable will automatically stop when
the end of the record is reached for 33 rpm records.
• Set the button to "ON' , turntable will keep moving for both 33 rpm
& 45 rpm records
8. R elease the tone arm holder & remove the protective cap form the
stylus
9. L ift the tone arm from its rest with the tone arm lift lever (4).
10. G ently lower the tone arm to the beginning of the record, or to the
start of a particular track.
14
GPO PR100_user_Manual EU_v4 - Sept 2021.indd 14 GPO PR100_user_Manual EU_v4 - Sept 2021.indd 14 28/09/2021 12:47 28/09/2021 12:47